IPS e.max® 

e.max CAD Abutment Solutions

Quality and esthetics redefined


IPS e.max CAD Abutment Solutions are designed for the fabrication of implant-supported hybrid structures for single teeth using CAD/CAM technology. The hybrid components are individually milled from lithium disilicate blocks (LS2) and bonded to a titanium base. Two new blocks have been added to the IPS e.max CAD product range, that is, IPS e.max CAD A 14 and A 16. These blocks feature a special interface, e.g. for the Sirona Ti base. The blocks are available in several shades and two levels of translucency, MO for hybrid abutments and LT for hybrid abutment crowns.



•   Hybrid abutments

•   Hybrid abutment crowns

For anterior and posterior teeth in both cases


IPS e.max CAD Abutment Solutions – The highlights

•   Precision fit due to CAD/CAM fabrication

•   Excellent and long-lasting esthetics due to tooth-coloured hybrid abutments

•   Hybrid abutment crown (2-in-1) for function, efficiency and easy access to the screw at any time

•   Very good compatibility with the oral soft tissue

•   Strong bond nbetween lithium disilicate (LS2) and Ti base due to Multilink Hybrid Ab

e.max CAD Monolithic Solutions

Versatile application


IPS e.max CAD Monolithic Solutions streamlines the fabrication of full-contour restorations that demonstrate high   strength, durability and proven clinical properties. A wide variety of restorations can be produced with these materials – from thin veneers to three-unit bridges. High esthetic standards are fulfilled due to the three different levels of translucency of the A-D shades and the special Bleach and Impulse shades. Individual characteristics can be added using the staining or cutback technique.



•   Thin veneers (0.4 mm)

•   Veneers

•   Occlusal veneers

•   Inlays/Onlays

•   Crowns

•   Three-unit bridges (up to the second premolar as the terminal abutment)


IPS e.max CAD Monolithic Solutions – The highlights

•   High-strength lithium disilicate glass-ceramic (LS2) featuring a flexural strength of 360 MPa

•   Excellent esthetics and optional customization

•   Comprehensive indication range

•   Extensive clinical evidence from long-term scientific studies

•   Fast and efficient processing

•   Clinically proven and versatile cementation options


* Source: M. Kern et al. “Ten-year results of three-unit bridges made of monolithic lithium disilicate ceramic”; Journal of the American Dental Association; March 2012; 143(3):234-240

e.max CAD Veneering Solutions

Outstanding overall strength


IPS e.max CAD Veneering Solutions are CAD/CAM manufactured veneer structures for zirconium oxide frameworks (ZrO2). The unrivalled combination of lithium disilicate (LS2) and zirconium oxide (ZrO2) enables the creation of tooth and implant-supported bridge restorations (CAD-on) of exceptional strength and esthetics. The manual workload in the fabrication of long-span bridges can be considerably reduced, if the veneer and the framework are both manufactured in a digital CAD/CAM-based process. Due to the possibility of producing multiple veneers in this way, multi-unit bridges can now be fabricated in a greatly streamlined working process.



•   Crowns

•   Bridges (three-unit and multi-unit, also on implants)


IPS e.max CAD Veneering Solution – The Highlights

•   Highly esthetic and very strong due to the unrivalled combination of materials: lithium disilicate (LS2) and zirconium oxide (ZrO2)

•   Innovative and homogenous ceramic bond

•   Individually matched tooth colours

•   Subsequent characterization is possible

•   Zirconium oxide-supported bridges are fabricated in just a few hours due to an efficient digital manufacturing process (CAD-on)